86-21-31261976
No. 100, Duhui Road, Minhang District, Shanghai, China
China Electronic Gauge Pressure Measurement, Find details about China Pressure Switch, Pressure Transmitter from Electronic Gauge Pressure Measurement - Shanghai LEEG Instruments Co., Ltd.
Ordering information chapter | |||||
Item | Parameters | Code | Instruction | ||
Model | PS131-TSR | Mono-silicon digital pressure sensor | |||
Sensor | Separator | Detailed specifications as following | |||
Pressure range code |
H602G | 6kPa | |||
H403G | 40kPa | ||||
H254G | 250kPa | ||||
H105G | 1MPa | ||||
H305G | 3MPa | ||||
H106G | 10MPa | ||||
S406S | 40MPa | ||||
Isolation diaphragm material |
S | SUS316 | |||
H | Hastelloy C | ||||
Isolation fluid filling |
S | Silicon Oil, process temperature: -45~250ºC | |||
D | Fluorocarbon oil, process temperature: -45-160ºC | ||||
Sensor seal | F | Stainless steel welding seal | |||
Electrical connetion |
Separator | - | Detailed specifications as following | ||
Electrical connetion |
H3 | M12*1(5 pins), Aviation plug, IP67 | |||
Output | Separator | - | Detailed specifications as following | ||
Output signal | F | 4~20mA three wire, power supply: 10-30VDC | |||
R | Modbus-RTU/RS485 5V/9-30VDC | ||||
5 | 0.5-4.5V DC three wire, power supply: 6-30VDC | ||||
N | NPN output, power supply: 12-30VDC | ||||
P | PNP output, power supply: 12-30VDC | ||||
Output contact | 1 | One way output contact | |||
2 | Two way output contact | ||||
First contact alarm value |
C1 | Customer setting | |||
A1 | Factory setting | ||||
First alarm method |
L1 | N, P: Lower than alarm value, output high level | |||
H1 | N, P: Higher than alarm value, output high level | ||||
W1 | Alarming in window | ||||
W2 | Alarming out window | ||||
Second contact alarm value |
C2 | Customer setting | |||
A2 | Factory setting | ||||
Second alarm method |
L2 | N, P: Lower than alarm value, output high level | |||
H2 | N, P: Higher than alarm value, output high level | ||||
W1 | Alarming in window | ||||
W2 | Alarming out window | ||||
Process connection |
Separator | - | Detailed specifications as following | ||
Material | 4 | SUS304 | |||
6 | SUS316 | ||||
Specification | M01 | M20*1.5 (M), Φ3 pressure lead hole, GB/T193-2003, ISO261 | |||
G01 | G1/2 (M), Φ3 pressure lead hole, EN837 | ||||
G02 | G1/4(M), Φ3 pressure lead hole, EN837 | ||||
G08 | G1/4(M), Φ3 pressure lead hole, GB/T7307, ISO228, DIN16288, BS2779, seal refers to DIN3852-E (back-end seal) |
||||
R01 | 1/2 -14NPT(M), Φ3 pressure lead hole, GB/T12716, ANSI/ASME B1.20.1 | ||||
R02 | 1/4 -18NPT(M), Φ3 pressure lead hole, GB/T12716, ANSI/ASME B1.20.1 | ||||
R03 | 1/2 -14NPT(F), Φ3 pressure lead hole, GB/T12716, ANSI/ASME B1.20.1 | ||||
R04 | 1/4 -18NPT(F), Φ3 pressure lead hole, GB/T12716, ANSI/ASME B1.20.1 | ||||
Additional options |
Separator | Detailed specifications as following(multiple) | |||
Factory setting pressure alarm value |
/A1-XXX | Heat exchange connector, M20*1.5 (F) change to M20*1.5(M), SUS304 | |||
/A2-XXX | Heat exchange connector, M20*1.5 (F) change to M20*1.5(M), SUS304 | ||||
Electrical connection accessory |
/J3 | Aviation female plug (straighter) with 2m cable, 5 pins, M12*1, IP67 | |||
Process connection mounting accessory |
/N1 | Heat exchange connector, M20*1.5 (F) change to M20*1.5(M), SUS304 |
|||
/N2 | Heat exchange connector, M20*1.5 (F) change to M20*1.5(M), SUS304 |
||||
Process connection accessory |
/Z1 | Welding connector, M20*1.5(F), SUS304 | |||
/Z2 | Welding adaptor, G1/2(F), SUS304 | ||||
Display mode | /D1 | According to your requirement | |||
Calibration report | /Q1 | Calibration report provided by our company | |||
Certificate | /L3 | CE certificate |